- Electronic Universal Testing Machine
-
Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
-
Insulator Testing Machine
-
Friction and Wear Testing Machine
KASON HIS255 High Impact Shock Test System
Equipment Application
The severe impact Testing Machine is professional equipment for standardized impact Tests, also known as standard impact tester. It serves as an equivalent alternative to the C-200 type severe impact machine specified in GJB standards, suitable for test samples with a total weight (including fixtures) ranging from 0 to 0.2 tons.
Compliant Standards
MIL-STD-202F Method 207A, Test methods for electronic and electrical components, severe impact test.
MIL-S-901C (1), High impact test requirements for shipboard machinery, equipment and systems.
Main Technical Parameters
|
Parameter |
Value / Specification |
|
Maximum Load Capacity |
4000kg |
|
Pendulum Mass |
255kg |
|
Pendulum Length |
1675mm |
|
Maximum Lifting Height of Pendulum |
1675mm |
|
Maximum Vertical Lifting Stroke |
1500mm |
|
Maximum Lifting Angle Range of Pendulum |
90° |
|
Overall Equipment Dimensions (L×W×H) |
5500×2000×4100 mm |
|
Power Supply |
Single-phase AC220V±10%, 50Hz, 2kW |
|
Spare Parts Requirement |
Full set of supporting spare parts required for normal equipment operation shall be provided |
|
Impact Plate Specification |
Threaded holes with 18mm diameter shall be machined on the working surface of the impact plate for grid fixation |
|
Compliant Standards |
GOST RV 20.39.304, GOST RV 20.57.305, GOST R 51371, etc. |
|
Test Control Function |
Automatic test completion with preset energy |
|
Equipment Protection & Control Features |
The elevator adopts frequency conversion soft start; the equipment is equipped with abnormal protection function with fault location prompt, operation warning, audible-visual alarm function, and chain storage function |
|
Standard Accessories |
Equipped with 4 limit bolts |
