KASON 103-AW Computerized Inverted Metallographic Microscope

Component

Specifications

Observing tube

45 ° tilt, three eye observation tube, pupillary distance adjustment range: 48-75mm, unilateral visual acuity adjustment: ± 5 diopters, spectral ratio: 40:60.

Eyepiece 

High eye point, large field of view, flat field eyepiece HWF 10X/20mm

Objective lens (long-distance flat field achromatic objective lens)

LMPlan  5X /0.13   WD15.5mm

LMPlan  10X/0.25   WD8.9mm

LMPlan  20X/0.40   WD8.7mm

LMPlan  50X/0.65   WD5.2mm

Converter

Internal positioning five hole converter

Focusing system

Low hand position coarse fine adjustment coaxial focusing mechanism, with a coarse movement of 30mm per revolution; Fine tuning accuracy 0.002mm. Equipped with an elastic adjustment handwheel to prevent slipping.

objective table

Three layer mechanical mobile platform, with an area of 180mmX150mm, controlled by a low hand position on the right hand, with a stroke of 35mm × 15mm.

Worktable

Metal carrier platform (center hole Φ 12mm)

Lighting System

Falling beam Kola lighting system, built-in aperture light bar, adaptive wide voltage 100V-240V, 50-60Hz, full spectrum 5W LED light, continuously adjustable brightness; Front light brightness indicator bar; ECO infrared sensing system.

Adapt mirror interface

Built in 0.5X adapter lens interface (using standard C-type interface design)

color filter

Equipped with frosted glass and blue filter.

Metallographic analysis system

FMIA2025 genuine metallographic analysis software, Sony chip 5 million camera device, micrometer.