- Universal / Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
HTBE-3000D Electronic Brinell Hardness Tester
Product introduction
The HTBE-3000D electronic Brinell hardness tester adopts advanced electronic sensor loading technology. Through the closed-loop control system, the CPU controls the sensor to collect signals. The stepper motor automatically loads and unloads the test force, and can automatically compensate the test force to ensure a better force value. Accurate and more stable indication. After measuring the indentation through the eyepiece, press the key to input the indentation length to directly obtain the hardness value, which improves work efficiency. At the same time, it is equipped with an emergency stop device, which meets the EU CE safety standard, has more reliable operability and safety, and has a high cost performance. , Widely used in factory workshops, colleges and universities, scientific research institutions, laboratories, etc.
Technical Parameters
|
Product number |
HTBE-3000D |
|
Brinell ruler |
HBW2.5/62.5 HBW2.5/187.5 HBW5/62.5 HBW5/125 HBW5/250 HBW5/750 HBW10/100、 HBW10/250 HBW10/500 HBW10/1000 HBW10/1500 HBW10/3000 |
|
Test force |
62.5kgf(612.9N)100kgf(980.7N)125kgf(1226N)187.5kgf(1839N)250kgf(2452N)500kgf(4903N)750kgf(7355N)1000kgf(8907N)1500kgf(14710N)3000kgf(29420N) |
|
Load control |
Automatic (loading/loading/unloading) |
|
.Maximum height of the test piece |
220mm |
|
Minimum unit of measure |
0.005mm |
|
Time of protection |
0~60s |
|
Hardness test range |
3.18~653HBW |
|
Total magnification |
20X |
|
Executive standard |
EN ISO 6506, , ASTM E-10-08, GB/T231.2，JJG150 -2005 |
|
Indenter-outer wall distance |
135mm |
|
Indenter-upper wall distance |
55mm (can increase the pressure from the indenter to the upper wall by customizing the indenter) |
|
Hardness reading |
After the indentation is measured through the eyepiece, the length of the indentation is directly input by the button to obtain the hardness value. |
|
Data output |
Built-in printer, print content: test conditions, number of measurements, average, maximum, minimum, maximum error, etc. |
|
power supply |
AC220+5%, 50~60Hz |
|
Dimensions (mm) |
520*210*745mm |
|
Host weight |
About 120kg |
Links
