Product introduction:
The HTB-3000MG Gantry Brinell Hardness Tester is a new generation product of our company. It adopts the latest fully automatic closed-loop sensor control technology. Feedback the force process and the magnitude to the differential level, forever eliminating the overload or underload fluctuation caused by the hydraulic or motor deceleration error, or the friction of the spindle knife edge with the increase of the use time of the traditional weight and lever amplifying loading system.
Technical Parameters:
Maximum height of test workpiece |
950mm |
Control system |
Computer touch screen control |
Measuring range: |
4-650HBW |
Test force |
62.5, 187.5, 250, 500, 750, 1000, 1500, 3000, kgf |
Motor Type |
Servo Motor |
Transmission mode |
ball screw |
Loading time |
1-99 seconds adjustable |
Distance between two columns |
1350mm (customizable) |
Table moving distance |
1000mm (customizable) |
Spindle lateral movement distance |
600mm (customizable) |
Dimensions: host |
2000*1800*2180mm |
Power supply |
220V, 50/60Hz |
Workbench size |
1500×1000mm (length×width) |
Net weight |
about 2500kg |