- Universal / Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
-
Insulator Testing Machine
Innovative Solution for Comprehensive Testing: The Advanced Insulator Electromechanical Damage Test Device
Advantages
Our company adopts an oil cylinder straight-pull structure: equipped with a special omposite mandrel calibration tool (rated tensile strength 550kN), which is light in weight and easy to hang. The vertical type does not require climbing, and the horizontal type heat engine can complete the calibration work without a huge workload.
Main Parameter on Main Host
|
Model |
KS-L600 |
|
Load number of workstations |
4 (number of stations can be customized such as single station, double station, three station, or four station) |
|
Tensile test force of single cylinder |
600kN |
|
Force range and accuracy of each set of loading device |
3-600kN, accuracy better than 0.5% |
|
loading speed |
No-load 0-120mm/min steplessly adjustable, automatic test control |
|
Environmental chamber test space (length*width*height) |
1700mm*800mm*3000mm |
|
Displacement (deformation) range and measurement accuracy |
300mm, accuracy better than ±0.01mm |
|
Control mode |
Constant test force fully automatic control |
|
Test force holding point and holding time |
Meet the pressure holding requirements of more than 200 hours |
|
Energy consumption |
Servo motor control, energy saving more than 95%, and no noise |
|
Preload method |
Cylinder preload |
|
Connection Type |
Mark 16-32 ball head ball socket |
|
Frame form |
welded steel structure |
|
Protective function |
Cylinder limit protection |
|
Hydraulic system overload overflow protection |
|
|
Test force overload protection |
|
|
Overcurrent and overvoltage protection |
|
|
Automatic shutdown protection at the end of test |
Links
