- Universal / Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
KS-RMD300 Rubber No Rotor Rheometer
1.Applicable Industry:
It is suitable for testing the variation of shear modulus when raw rubber is vulcanized. The shear modulus is proportional to the crosslinking density. So the results reflect the changes in the degree of crosslinking during vulcanization. So that we can measure the parameters like curing speed, Curing time and desulfurization.
2. Specification:
|
MODEL |
KS-RMD300 |
|
Temperature range |
RT~200℃ |
|
Minimum temperature display |
0.1℃ |
|
Temperature fluctuation range |
±0.15℃ |
|
Heating rate |
About 15℃/min |
|
Torque range |
0-20mm |
|
Torque minimum reading |
0.001nm |
|
Swing angle |
±0.5°/ ±1°/ ±3°(optional) |
|
Swing speed |
100r/min(1.66HZ) |
|
Torque accuracy |
0.3% |
|
Temperature display resolution |
0.01℃ |
|
Temperature recovery time |
< 1.5min |
|
Temperature unit |
C (degrees Celsius), F (Fahrenheit), K (Kelvin) |
|
Acquisition rate |
200time/s |
|
Software language |
English, Chinese Simplified, Chinese Traditional |
|
Calculation parameters |
ts1,ts2,t10,t30,t50,t70,t90,Vc1,Vc2 |
|
Software connection |
USB2.0 |
|
Power |
1 phase 220V±15V 50HZ |
|
Torque unit |
N.m,N.cm,N.inch,kN.m,kN.cm,kN.inch,kg.m,kg.cm,kg.inch,lp.m,lp.cm,lp.inch,g.m,g.cm,g.inch |
Links
