- Universal / Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
METPRESS-2AT Automatic Metallographic Specimen Mounting Press
Introduction:
For metallographic rock phase sample analysis, mosaic is the first step in the sample preparation process, especially for some difficult holding tiny samples, irregularly shaped samples, or the need for automatic grinding and polishing samples, the mosaic is an important step before sample preparation. METPRESS-2AT automatic metallographic sample mounting press is an advanced automatic sample mosaic equipment, controlling the whole mosaic process by program, one-touch operation of heating, pressurization, loading, cooling, unloading process.
Main parameters:
MODEL :METPRESS-2AT
Sample diameter :Ø22×15mm; Ø30×15mm
Ø45×15mm (Choose one)
Heating temperature :35-200℃
Heating time :0~99 min 99s
Cooling time ：0~99 min 99s
Cooling method :Water
Heater ：220V, 700W
Machine power ：950W
Power supply ：Single phase AC 220V, 50Hz
Dimension ：455× 475× 430 (mm)
Net weight ：50kg
Gross weight ：62kg
For metallographic rock phase sample analysis, mosaic is the first step in the sample preparation process, especially for some difficult holding tiny samples, irregularly shaped samples, or the need for automatic grinding and polishing samples, the mosaic is an important step before sample preparation. METPRESS-2AT automatic metallographic sample mounting press is an advanced automatic sample mosaic equipment, controlling the whole mosaic process by program, one-touch operation of heating, pressurization, loading, cooling, unloading process.
Main parameters:
MODEL :METPRESS-2AT
Sample diameter :Ø22×15mm; Ø30×15mm
Ø45×15mm (Choose one)
Heating temperature :35-200℃
Heating time :0~99 min 99s
Cooling time ：0~99 min 99s
Cooling method :Water
Heater ：220V, 700W
Machine power ：950W
Power supply ：Single phase AC 220V, 50Hz
Dimension ：455× 475× 430 (mm)
Net weight ：50kg
Gross weight ：62kg
Links
