This is a newly designed fully digital ultrasonic flaw detector with many innovations, with fast detection speed, high accuracy and stable waveform. The detection rate of small defects is high. The ultrasonic echo signal analysis adopts DSP processing technology, the target defect signal recognition is fast, the flaw detection waveform display sampling smooth filtering technology, and the key performance indicators are similar to or exceed the international similar products.
1. Peak memory function
2. Quick knob adjustment, convenient operation
3. A, B type display mode
4. Defect equivalent calculation
5. With echo envelope display function
6, with waterproof function
7. EL highlight graphic dot matrix display, no viewing angle limit, not affected by temperature and sunlight
8. Up to 10 independent flaw detection channels
9. Able to store 500 A-scan graphics
10. With independent double gate setting and alarm function
11. Lithium battery, no memory, continuous working time can reach more than 8 hours
12. Two input methods of probe angle and K value
13, can directly drive the U disk
14. It can communicate with PC and has powerful Windows data processing software
15. Repeated transmission frequency can reach 1KHz
16. Ultra-high sampling frequency, the details of the RF waveform are fully displayed
17. With waveform freezing function
Technical parameters:
Detection range |
2.5~5000mm |
Material speed |
1000~9999m/s |
working frequency |
0.2~15MHz (low frequency 0.2~1, intermediate frequency 0.5~4, high frequency 2~15) |
Gain adjustment |
110dB (0.2, 0.5, 1, 2, 6, 12 steps) |
Dynamic Range |
≥ 34dB |
Vertical linearity error |
≤ 3% |
Horizontal linearity error |
≤ 0.2% |
Sensitivity margin |
≥60dB (depth 200mmΦ2 flat bottom hole) |