- Universal / Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
KS-Shore A Hardness Tester
Application:
Digital shore rubber hardness tester is an apparatus to measure vulcanized rubber and plastic products.This apparatus has three models of Type A, Type C and Type D.
Type A and D respectively are applicable to the testing of low and medium hardness, and high-hardness materials.
Type C applies to the testing of microporous material which is used to make shoes, with compression rate 50 percent, stress 0.049 MPa or above, and this kind of material is made of rubber plastic and has blister in plastic.
This hardness gauge conforms to the regulations of GB/T531,GB2411, HG/T2489, JB6148.
Main technical parameters
1. Measure range: 0-100 degree.
2. Measure error: between 20~90 degree, Degree of error <=± 1 degree
3. Resolution: 0.1 degree
4. Pressure needle stroke: 0-2.5mm
5. Pressure of pressure needle tip: A type, C type 0.55N-8.05N, D type 0-44.5N
Digital shore rubber hardness tester is an apparatus to measure vulcanized rubber and plastic products.This apparatus has three models of Type A, Type C and Type D.
Type A and D respectively are applicable to the testing of low and medium hardness, and high-hardness materials.
Type C applies to the testing of microporous material which is used to make shoes, with compression rate 50 percent, stress 0.049 MPa or above, and this kind of material is made of rubber plastic and has blister in plastic.
This hardness gauge conforms to the regulations of GB/T531,GB2411, HG/T2489, JB6148.
Main technical parameters
1. Measure range: 0-100 degree.
2. Measure error: between 20~90 degree, Degree of error <=± 1 degree
3. Resolution: 0.1 degree
4. Pressure needle stroke: 0-2.5mm
5. Pressure of pressure needle tip: A type, C type 0.55N-8.05N, D type 0-44.5N
Recommended products
Links
