- Universal / Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
-
Insulator Testing Machine
Computer-Controlled 100KN Universal Testing Equipment Electromechanical Load Frame with High Precision for Material Strength Analysis
Introduction
ETM series electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components. The load frames are rigid constructed, providing superior axial and lateral stiffness.
Standards
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221, DIN-51223, DIN-51227, DIN-51228, UNE-7-474-92,
Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4.
Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1
Main technical parameters
|
Model |
KASON ETM 105 |
|
Measurement Parameters |
|
|
Load Capacity |
100KN |
|
Load measurement |
Universal strain-gage load cell (tension-compression). Additional load cells can be installed |
|
Load accuracy |
Class 0.5 according to ISO 7500-1 - Meets ASTM E-4 |
|
Measuring Range of test force |
0.2%-100%FS |
|
Indicating error of test force |
Within ±0.5% of indicating value |
|
Load resolution |
Capacity/ 500, 000 (fully auto scaling of single measurement range) |
|
Deformation measuring range |
0.2%～100%FS |
|
Deformation accuracy |
≤±0.5% |
|
Deformation rate adjustment range |
0.02～5%FS |
|
Displacement accuracy |
Within ±0.5% of the value |
|
Displacement resolution |
0.04μm |
|
Control Parameters |
|
|
Adjustable range of force control rate |
0.001％～5％FS/s |
|
Control accuracy of force control rate |
When rate is less than 0.05%FS/s, within ±2% of setting value; When rate is no less than 0.05%FS/s, within ±0.5% of setting value. |
|
Adjustable range of deformation rate range |
0.005～5%FS/s |
|
Control accuracy of deformation rate accuracy |
When rate is less than 0.05%FS/s, within ±2% of setting value; When rate is no less than 0.05%FS/s, within ±0.5% of setting value. |
|
Crosshead speed range |
0.001～500mm/min |
|
Crosshead speed accuracy |
Within ±0.5% of the value |
|
Mainframe parameters |
|
|
Testing space (Crosshead Travel) |
1175mm |
|
Max. Tensile Testing Space |
845mm |
|
Test width |
450mm |
|
Machine Dimension |
810x420x1850mm |
|
Approx Weight |
420kg |
|
Power supply |
AC220V±10%,50Hz/60Hz |
|
Power consumption |
1kW |
Links
