- Universal / Tensile Testing Machine
- Hydraulic universal testing machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
- Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
-
Cupping Testing Machine
- Spring Testing Machine
-
Other testing machine
- Paper and Package Test Equipment Series
- Textile Test Equipment Series
- Optical Test Equipment Series
- Spectrometer
- Testing equipment for masks and protection cover
- Plastic Pipes and Rubber Test Machine
- Other testing machine
- Video Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Force Gauge
- Mechanical Machine
- Hardness Tester
-
NDT Series
-
Microscope
- Metallographic
- Testing machine accessories
- High And Low Temperature Chamber
Device for determining the strength of the sole and welt fastening (up to 3 kN)
Application:
The device is designed to determine the strength of the fastening of the sole and welt in welted shoes, soles and blanks in shoes for doppel and sandal fastening of leather shoes with nail, screw, wooden-studded, stitched fastening of soles at a temperature of (20 +15 -10 ) ° C according to GOST 9134 -78. The maximum width of the fastened end is 40 mm, the maximum thickness of the fastened end is 28 mm. The fixture is attached to the standard grips of the testing machine in the tensile zone using rectangular adapters. The device is allowed to be used with a load of up to 3 kN.
The device is designed to determine the strength of the fastening of the sole and welt in welted shoes, soles and blanks in shoes for doppel and sandal fastening of leather shoes with nail, screw, wooden-studded, stitched fastening of soles at a temperature of (20 +15 -10 ) ° C according to GOST 9134 -78. The maximum width of the fastened end is 40 mm, the maximum thickness of the fastened end is 28 mm. The fixture is attached to the standard grips of the testing machine in the tensile zone using rectangular adapters. The device is allowed to be used with a load of up to 3 kN.
Links
