Abstract
Selecting a stable, fully standard-compliant steel bar forward & reverse Bending Testing Machine relies on structural design, fixture matching, control mode and full set of bending mandrels.
Core Overview
Steel bar bending Test is the core inspection item for evaluating hot rolled ribbed steel bar plasticity, and the test equipment must strictly match domestic and international bending test standards. KASON BT-40EG touch screen steel bar bending Tester is upgraded on the basis of traditional bending test equipment byKASON Company, with patented anti-slip clamping structure, full LCD touch intelligent control and complete HRB400/HRB500 bending mandrel set, covering Φ6–Φ40mm rebar forward bending 180° and reverse bending all-range test demands, which is the preferred test equipment for long-term batch rebar inspection.
Applicable Test Specimens
1. Construction materials: HRB400, HRB500 hot rolled ribbed steel bars, hot rolled round steel bars.
2. Metal semi-finished products: steel plates, flat steel, thin metal profiles.
Supported Test Items
Forward cold bending test, plane reverse bending test of steel bar & steel plate.
Structural Design & Unique Competitive Advantages
1. Patent anti-slip clamping structure: Equipped with special axial steel bar fastener and longitudinal steel plate locking device, effectively eliminate longitudinal sliding of specimens during bending test, solve the common error problem of traditional bending machines, and the clamping structure has obtained national utility model patent.
2. Full touch screen intelligent operation: Cancel old mechanical key panel, adopt LCD touch screen to display real-time bending angle and set target angle one-click, the service life of control system is improved by 5–6 times, operation logic is simple and the learning cost for new operators is low.
3. Retractable safety protection structure: Protective net adopts gas spring drive, can stay at any opening angle in stroke, effectively block broken steel bar splashing during test, greatly improve laboratory operation safety.
4. Foldable integrated handwheel: The handwheel for adjusting working disc is foldable, saving placement space of the equipment, neat appearance and convenient daily storage.
5. Compact low-noise host structure: Cycloidal pin gear speed reducer matched with servo drive motor, stable transmission, low operation noise, small overall floor area, suitable for limited laboratory space.
Core Buying Considerations Beyond Equipment Performance
After-sales Service Guarantee
1. Whole machine 12-month comprehensive warranty, vulnerable bending mandrels provide cost preferential replacement channel
2. Professional remote video guidance for equipment installation, touch screen operation training and daily fault troubleshooting
3. Independent factory R&D and production, all spare parts self-produced, fast delivery of accessories to reduce laboratory downtime
Long-term Use Cost Advantage
1. Low daily maintenance cost: Servo drive + gear reducer stable transmission, few wearing parts
2. Complete standard mandrel set, no extra purchase of fixtures in the early stage, one-time procurement meets full-spec rebar test
3. Low power consumption motor, long-term batch inspection effectively save power cost
Certification Support
The whole machine passes CE & ISO 9001 factory certification, test data and operation records can meet third-party inspection and laboratory qualification audit requirements.
Model Matching & Application Scenario Expansion
KASON BT-40EG is positioned as full-spec touch screen rebar bending tester for Φ6–Φ40mm steel bars. For ultra-large diameter steel bars or special alloy steel plates with customized bending radius,KASON Companycan provide customized non-standard bending mandrels to match diversified test demands of metallurgical factories, construction quality inspection stations and material laboratories.
Frequently Asked Questions (FAQ)
Q1: What kinds of steel can HSTBT-40EG test?
A1: Mainly for HRB400, HRB500 hot rolled ribbed steel bars, hot rolled round steel bars, steel plates and thin metal profiles, supporting forward bending and reverse bending performance inspection.
Q2: Does the machine come with all bending mandrels for common rebar specifications?
A2: Standard configuration contains full 45 pieces of HRB400 and HRB500 bending & reverse bending mandrels covering Φ6–Φ40mm, covering most conventional engineering rebar specifications.
Q3: Can the touch screen automatically record bending test data?
A3: The touch screen system can record bending angle, test time and equipment operating parameters, and can export test records to match laboratory test report sorting work.
Q4: What packaging form is adopted for export delivery?
A4: Standard export plywood case packaging, with moisture-proof, shockproof and rust-proof protection treatment, suitable for sea, land and air long-distance transportation.
Contact me if you are interested!
Email: admin@jnkason.com
Whatsapp: +86 15910081986
